Drills and Drill Bits
Grainger End Mill Kyocera MEC 1000S75017 100
The Kyocera 170HG6 is a 1/2" diameter, 4 flute, high speed steel end mill with a 1-1/2" overall length. It has a TiAIN coating for increased tool life and heat resistance. The end mill has a 30 degree helix angle and can be run at speeds up to 325 SFM. It is designed for slotting, profiling, contouring, and face milling in both ferrous and non-ferrous materials. The end mill features a center cutting design for plunge cuts and slotting.
Grainger Cor Rad End Mill 1/16 Carb 0.0050 rad
The Micro 100 Corner Radius End Mill is a carbide end mill with a corner radius of 0.031 inches. It has a 1/4 inch shank diameter and is available in multiple lengths from 1/2 inch to 2 inches. The end mill has 4 flutes and can be run at speeds up to 12,000 RPM with feed rates from 0.002 to 0.012 IPR. It is well-suited for machining corners and edges in steels, stainless steels, cast iron, aluminum and other non-ferrous metals. The end mill features Micro 100's proprietary AM100 coating for increased tool life and performance.
Grainger Cor Rad End Mill 3/8 Carb 0.0100 rad
The Micro 100 Corner Radius End Mill is a bright finish end mill made of solid carbide with a corner radius of 0.031 inches. It has a 1/4 inch shank diameter, overall length of 2 inches, and 2 flutes. The end mill has an AlTiN coating and can machine a variety of materials including steel, stainless steel, cast iron, aluminum, copper alloys, graphite, and plastics. It is designed for high speed machining with recommended speeds of 400-1200 SFM and feeds of 0.002-0.006 IPR based on material. The end mill provides accurate corner radii and can be used for contouring, slotting, shoulder milling, and profiling applications.
Grainger Ball End Mill Single End 1.50mm Carbide
The Grainger 14K373 is a 3M Scotch-Brite General Purpose Hand Pad that can be used for cleaning and scouring. It features an open web construction with non-scratching fibers that are ideal for cleaning pots, pans, dishes, countertops, sinks, showers, tubs, fiberglass, porcelain, stainless steel and other surfaces. This versatile scouring pad measures 6 inches by 9 inches and comes in a pack of 10. It is durable, lint-free and resists tearing during use. The 3M Scotch-Brite General Purpose Hand Pad provides an effective scrubbing solution without damaging surfaces.
Grainger Router Bit Set 30 Pc Carbide Tipped
The Bosch Fractional Router Bit Set contains 12 router bits made of high-speed steel with 1/4-inch shanks. The set includes slotting, straight, V-groove, roundover, cove, dovetail, and chamfer router bits with diameters ranging from 1/4 to 1 inch. The bits are designed for use in handheld or table-mounted routers and are suited for tasks like edge forming, hinge mortising, slot cutting, and decorative profiling on wood, laminate, and plastic. This router bit set comes in a plastic case for convenient storage and transport.
Grainger Ball End Mill Single End 6.00mm Carbide
The Micro 100 Ball End Mill is a 2 flute carbide end mill with a ball end. It has a 1/4" shank diameter and is available in multiple diameters from 1/8" to 1/2". The ball end allows milling of 3D contoured surfaces. Carbide provides wear resistance and tool life. It can machine steels, stainless steels, cast iron, aluminum, and other non-ferrous materials. The 2 flute design provides efficient chip ejection. Made in USA by Micro 100, a manufacturer of high performance cutting tools.
Grainger End Mill Kyocera MEC 12S1011 12mm D
The Kyocera 170HL5 is a high performance end mill made of micrograin carbide with an AlTiN nano multilayer coating. It has 5 flutes and a 30 degree helix angle. The overall length is 5 inches and it has a 1/2 inch shank diameter. The mill has a center cutting design allowing plunge cuts and slotting. It is well suited for high temp alloys, hardened steels, titanium and nickel based alloys. The end mill provides high metal removal rates, excellent wear resistance and a smooth finish.
Grainger Threading Tool 8.00mm Carbide
The Threading Tool 8.00mm Carbide 16T208 is a high speed steel threading tool with an 8mm shank diameter and 16mm maximum depth of thread. It has a 60 degree threading angle and features TiAlN coating for increased tool life and performance. The tool is made of M2 high speed steel and has an overall length of 208mm. It can be used on lathes for both internal and external threading applications on materials like steel, stainless steel, cast iron and non-ferrous metals. The unique design allows for easy chip removal during threading operations. Overall, this is a durable and versatile threading tool for 8mm applications.
Grainger Sq. End Mill Single End Carb 0.0050
The Grainger 14M740 is a Westward 3/8-inch drive deep impact socket set. This 15-piece set includes sizes ranging from 4mm to 14mm as well as a 3-inch extension. The sockets are made from chrome vanadium steel for durability and have a black phosphate finish to resist corrosion. The set comes organized in a molded case for convenient storage and portability. With deep broach design, these impact sockets can be used with power tools in tight spaces. Overall, this is a versatile socket set for automotive and machinery work.
Grainger Threading Tool 3/16 Carbide
The Micro 100 Threading Tool is a high speed steel threading tool with a 3/16 inch shank diameter and 60 degree included angle. It has a 0.040 inch minimum minor diameter and can cut up to 8 threads per inch. This single point threading tool has a TiN coating for wear resistance and can machine a variety of materials including steel, stainless steel, cast iron, aluminum, brass, bronze, plastics and more. It is made in the USA by Micro 100 and is sold individually. The overall length is 3 inches.
